Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

Measurement of pressure in ammonia reactor is done by

Bourdon gauge
U-tube manometer
Inclined tube manometer
Pirani guage

Correct Answer: Bourdon gauge

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

A process is initially at steady state with its output y=l for an input u=l. The input is suddenly changed to 2 at time t=0. The output response is y(t)=1+2t. The transfer function of the process is
What is the dynamic error in a critically damped second order instrument for a ramp input (At)?
Which of the following is a 'contact' pyrometer?
On-off controllers are normally used for
Pressure of 0.01 psi (absolute) can be measured by __________ gauge.
For increased speed of response of an expansion pressure spring thermometer, the thermometer bulb should have a
Pressure of 0.0001 absolute psi can be measured by __________ gauge.
For the block diagram shown below : The characteristic equation is
An ideal PID controller has the transfer function . The frequency at which the magnitude ratio of the controller is 1, is
Continuous measurement of moisture in paper is done by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion