Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

Feed forward controller accounts for the __________ changes.

set point
load
both (a) & (b)
neither (a) nor (b)

Correct Answer: load

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

Pick out the most suitable instrument for measuring temperature in the range of-40 to 425°C.
The __________ of a vapor pressure thermometer is a primary element.
"A control system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at the crossover frequency." This is __________ criterion.
Measurement of pressure in ammonia reactor is done by
A process is initially at steady state with its output y=l for an input u=l. The input is suddenly changed to 2 at time t=0. The output response is y(t)=1+2t. The transfer function of the process is
What is the dynamic error in a critically damped second order instrument for a ramp input (At)?
Which of the following is a 'contact' pyrometer?
On-off controllers are normally used for
Pressure of 0.01 psi (absolute) can be measured by __________ gauge.
For increased speed of response of an expansion pressure spring thermometer, the thermometer bulb should have a

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion