Home » Certification » CISCO Certification

Your switch has a port status LED that is alternating between green and amber. What could this indicate?

The port is experiencing errors
The port is shut down
The port is in STP blocking mode
Nothing, this is normal.

Correct Answer: The port is experiencing errors

Explanation:

When you connect to a switch port, at first the link lights are orange/amber, and then they turn green, indicating normal operation. If the link light is blinking, you have a problem.

← Previous Question Next Question→

More Questions from CISCO Certification

If a switch receives a frame and the source MAC address is not in the MAC address table but the destination address is, what will the switch do with the frame?
What command will display the forward / filter table?
You want to run the new 802.1w on your switches. which of the following would enable this protocol?
You have two switches connected together with two crossover cables for redundancy, and STP is disabled. Which of the following will happen between the switches?
Which proprietary Cisco STP extensions would put a switch port into err-disabled if a BPDU is received on this port?
Which Cisco 802.1d extension stops BPDU from being transmitted out a port?
Which switching technology reduces the size of a broadcast domain?
You want to improve network performance by increasing the bandwidth available to hosts and limit the size of the broadcast domains. Which of the following options will achieve this goal?
A switch has been configured configured for three different VLANs : VLAN2, VLAN3 and VLAN4. A router has been added to provide communication between the VLANs. What minimum type of interface necessary on the router if only one connection is to be made between the router and the switch?
Which of the following commands sets a trunk port on a 2960 switch?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion