Home » Certification » CISCO Certification

You want to improve network performance by increasing the bandwidth available to hosts and limit the size of the broadcast domains. Which of the following options will achieve this goal?

Managed hubs
Bridges
Switches
Switches configured with VLANs

Correct Answer: Switches configured with VLANs

Explanation:

By creating and implementing VLANs in your switched network, you can break up broadcast domains at layer2. For hosts on different VLANs to communicate, you must have a router or layer 3 switch.

← Previous Question Next Question→

More Questions from CISCO Certification

A switch has been configured configured for three different VLANs : VLAN2, VLAN3 and VLAN4. A router has been added to provide communication between the VLANs. What minimum type of interface necessary on the router if only one connection is to be made between the router and the switch?
Which of the following commands sets a trunk port on a 2960 switch?
You connect a host to a switch port, but the new host cannot log into the server that is plugged into the same switch. What could the problem be?
What is frame tagging?
What type of Cisco tagging information allows VLANs to be multiplexed over a trunk link through an external encapsulation method?
Which of the following is an example of a standard IP access list?
You need to create an access list that will prevent hosts in the network range of 192.168.160.0 to 192.168.191.0 . Which of the following lists will you use?
What router command allows you to determine whether an IP access list is enabled on a particular interface?
If you wanted to deny all Telnet connections to only network 192.168.10.0, which command could you use?
Which command would you use to apply an access list to a router interface?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion