Curioustab

Home » Certification » CISCO Certification

Your company wants to reconfigure a Catalyst 2950. Which actions must be taken to erase the old configuration?(Choose three) A. Erase flash B. Restart the switch C. Delete the VLAN database D. Erase the startup configuration

Correct Answer: Answer: B C D

← Previous Question Next Question→

More Questions from CISCO Certification

If one of the host connected to Sw-AC3 wants to send message to ip 190.0.2.5 (or any ip on a different subnet) what will be the destination MAC address ?
Which three IP addresses can be assigned to hosts if the subnet mask is /27 and subnet zero is usable? A. 10.15.32.17 B. 17.15.66.128 C. 66.55.128.1 D. 135.1.64.34 E. 129.33.192.192 F. 192.168.5.63
Differentiate types of Ethernet cabling and identify their proper application?
If you use either Telnet or FTP, what layer are you using to generate the data?
The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
Which of the following protocols uses both TCP and UDP?
Differentiate the DoD and the OSI network models?
If a host on a network has the address 172.16.45.14/30, what is the subnetwork this host belongs to?
You need to subnet a network that has 5 subnets, each wit at least 16 hosts. Which classful subnet mask would you use?
You telnet into a remote device and type debug ip rip, but no output from the debug command is seen. What could the problem be?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion