Home » Certification » CISCO Certification

Which of the following is correct?

Full- duplex Ethernet uses one pair of wires
Full- duplex Ethernet uses two pairs of wires
Half- duplex Ethernet uses two pairs of wires
Full- duplex Ethernet uses three pairs of wires

Correct Answer: Full- duplex Ethernet uses two pairs of wires

← Previous Question Next Question→

More Questions from CISCO Certification

Convert the following from decimal IP address to binary format. 192.168.10.15
Convert the following from binary format to hexadecimal 11001010.11110101.10000011.11101011
A static map to the S-AMER location is required. Which command should be used to create this map? A. frame-relay map ip 172.16.1.3 704 broadcast B. frame-relay map ip 172.16.1.3 196 broadcast C. frame-relay map ip 172.16.1.3 702 broadcast D. frame-relay map ip 172.16.1.3 344 broadcast
As a Cisco technician, you need to know EIGRP protocol very well. Which of the following is true about EIGRP successor routes? (Choose two) A. A successor route is used by EIGRP to forward traffic to a destination B. Successor routes are stored in the neighbor table following the discovery process C. Successor routes are flagged as "active" in the routing table D. A successor route may be backed up by a feasible successor route
Users on the 192.168.10.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server? A. IP route 0.0.0.0 0.0.0.0 s0/0/0 B. IP route 0.0.0.0 0.0.0.0 209.165.200.226 C. IP route 209.165.200.0 255.255.255.0 192.168.10.250 D. IP route 192.168.10.0 255.255.255.0 209.165.100.250
All hosts in the networks have been operational for several hours when the DHCP server goes down. What happens to the hosts that have obtained service from the DHCP server? A. The hosts will not be able to communicate with any other hosts. B. The hosts will continue to communicate normally for a period of time. C. The hosts will be able to communicate with hosts outsides their own network D. The hosts will only be able to communicate with other hosts by IP address not by host name
What is the purpose of the DHCP server? A - to provide storage for email B - to translate URLs to IP addresses C - to translate IPv4 addresses to MAC addresses D - to provide an IP configuration information to hosts
An administrator issues the command A. The PC host PC1 has connectivity with a local host B. The PC host PC1 has connectivity with a Layer 3 device C. The PC host PC1 has a default gateway correctly configured D. The PC host PC1 has connectivity up to Layer 5 of the OSI model E. The PC host PC1 has the TCP/IP protocol stack correctly installed
What must be configured on the network in order for users on the Internet to view web pages located on Web Server 2? A. On router R2, configure a default static route to the 192.168.10.0 network B. On router r2, configure DNS to resolve the URL assigned to Web Server 2 to the 192.168.10.20 address C. On router R1, configure NAT to translate an address on the 209.165.100.0/24 network to 192.168.10.20 D. On router R1, configure DHCP to assign a registered IP address on the 209.165.100.0/24 network to Web Server 2
The router address 192.168.10.250 is the default gateway for both the Web Server 2 and Host 1. What is the correct subnet mask for this network? A. 255.255.255.0 B. 255.255.255.192 C. 255.255.255.250 D. 255.255.255.252

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion