Brick masonry finishes: The type of pointing that forms a V-shaped projection proud of the wall face is called

Introduction / Context:Pointing is the finishing of mortar joints in exposed masonry. Different profiles are used to shed water, create shadows, or achieve a distinct architectural expression. Knowing the names helps when reading specifications and inspecting work.

Given Data / Assumptions:

• The joint is finished with a V-shaped ridge formed beyond the wall face.
• Common pointing types include flush, recessed, weathered, vee (V), and tuck.

Concept / Approach:V-pointing creates a raised V-shaped profile by tooling the joint mortar, projecting slightly from the wall face. Weathered pointing slopes outward to shed water; recessed pointing is pressed back from the brick face; tuck pointing uses a contrasting fillet to simulate fine joints; flush is struck level with the surface.

Step-by-Step Solution:Match the described V-shaped projection with the standard name → V-pointing.Rule out weathered (sloping), recessed (set back), tuck (decorative fillet), and flush (level with face).Select “V-pointing.”

Verification / Alternative check:Masonry handbooks illustrate the characteristic sharp V-tool ridge for this pointing profile.

Why Other Options Are Wrong:Recessed/Flush: do not project from the face.Weathered: sloped, not V-shaped ridge.Tuck: uses narrow contrasting fillet, not a V ridge.

Common Pitfalls:Over-projecting the ridge making it fragile; poor compaction leading to water ingress at the arrises.

Final Answer:V-pointing.