Solve this multiple-choice question and choose the correct option.

Home » Mechanical Engineering » Machine Design

Fatigue design: basis of the Soderberg relation In fatigue/dynamic loading design, the Soderberg line uses which material property on the static-stress axis (unlike other relations that often use ultimate strength)? Choose the correct property.

Difficulty: Easy

Ultimate tensile strength
Yield strength
Proof stress (0.2%)
True fracture strength

Correct Answer: Yield strength

Explanation:

ConceptThe Soderberg criterion is a linear fatigue design relation that limits mean stress using the yield strength (not the ultimate strength), paired with the fatigue limit for alternating stress.

ComparisonGoodman and Gerber relations use ultimate tensile strength on the mean-stress intercept; Soderberg is more conservative by using yield strength.

Final AnswerYield strength

← Previous Question Next Question→

More Questions from Machine Design

Power screws: condition for an overhauling screw A screw is said to be ‘‘overhauling’’ when the load tends to lower itself without external effort. Which efficiency range corresponds to this condition?
Limits and fits (IS system): interpretation of ‘‘100 H6/g5’’ Under Indian/ISO limits and fits notation, what does ‘‘100 H6/g5’’ indicate about the size reference? Choose the correct interpretation.
Flange coupling proportions: thickness of flange relative to shaft diameter Statement to evaluate: In a (cast iron) flange coupling, the flange thickness is taken as one-half of the shaft diameter (t ≈ 0.5d). Choose the correct option (True/False).
Locking devices for nuts: identification by construction detail Which locking device has a bottom cylindrical portion recessed to receive the tip of a locking set screw? Choose the correct nut type.
Riveted joint design check: equality of rivets in shear and crushing? Statement to evaluate: ‘‘In a riveted joint, the number of rivets working in shear must be equal to the number of rivets working in crushing.’’ Choose the correct option (True/False).
Belts: belt speed for maximum power transmission Assume a flat belt with maximum permissible belt tension T and belt mass per unit length m. Find the belt speed condition that maximizes power transmitted. Choose the correct expression.
Bevel gear classification based on intersecting axes and pitch angle Two shafts intersect at an angle greater than 90°, and one bevel gear has a pitch angle of 90°. Identify the correct name for this gear pair. Choose the correct option.
Lubrication regimes in sliding bearings: terminology check Statement to evaluate: “A sliding bearing in which the working surfaces are completely separated by lubricant is called a zero film bearing.” Decide if the statement is correct or incorrect.
Fasteners (castle nuts): standard slot count for 25 mm size For a 25 mm castle (slotted) nut, select the standard number of slots provided for cotter pin locking. Choose the correct option.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion