logo

CuriousTab

CuriousTab

Diodes and Applications problems


  • 1. If a 169.7 V half-wave peak has an average voltage of 54 V, what is the average of two full-wave peaks?

  • Options
  • A. 119.9 V
  • B. 108.0 V
  • C. 115.7 V
  • D. 339.4 V
  • Discuss
  • 2. List three diode packages:

  • Options
  • A. clip package, DIP, small current package
  • B. DIP, small current package, large current package
  • C. small current package, large current package, and SIP
  • D. small current package, large current package, clip package
  • Discuss
  • 3. When checking a diode, low resistance readings both ways indicate the diode is:

  • Options
  • A. open
  • B. satisfactory
  • C. faulty
  • D. not the problem
  • Discuss
  • 4. With a 12 V supply, a silicon diode, and a 370-ohm resistor in series, what voltage will be dropped across the diode?

  • Options
  • A. 0.3 V
  • B. 0.7 V
  • C. 0.9 V
  • D. 1.4 V
  • Discuss
  • 5. A characteristic curve is the result of a current versus voltage plot of diode activity, which begins at the:

  • Options
  • A. 3rd quadrant
  • B. current plot
  • C. graph origin
  • D. voltage plot
  • Discuss
  • 6. What circuit activity may shift a characteristic curve so that diode operating points are different?

  • Options
  • A. higher power (heat)
  • B. higher resistance
  • C. lower voltage
  • D. lower current
  • Discuss
  • 7. What is wrong with this circuit?

    Electronics Diodes and Applications: What is wrong with this circuit?

  • Options
  • A. The zener is open.
  • B. The zener is shorted.
  • C. nothing
  • D. not enough data
  • Discuss
  • 8. What is the current through the diode?

    Electronics Diodes and Applications: What is the current through the diode?

  • Options
  • A. 1 mA
  • B. 0.975 mA
  • C. 0.942 mA
  • D. 0.0 mA
  • Discuss
  • 9. One of the advantages of using transformer coupling in a half-wave rectifier is that it allows the ac source to be directly connected to the load.

  • Options
  • A. True
  • B. False
  • Discuss
  • 10. A zener diode can be tested with an ohmmeter.

  • Options
  • A. True
  • B. False
  • Discuss

First 2 3 4 5 6 7 8 9