Curioustab

Home » Digital Electronics » Digital Signal Processing

Offset is the characteristic of a DAC defined by the absence of any incorrect step reversals.

True
False

Correct Answer: False

← Previous Question Next Question→

More Questions from Digital Signal Processing

In a binary-weighted-input digital-to-analog converter, the values of the input resistors are chosen to be proportional to the binary weights of the corresponding input bits.
Successive-approximation is perhaps the most widely used method of A/D conversion.
Incorrect codes are a form of output error for a DAC.
Digital signal processors must be programmed to perform specific tasks.
The ADC0804 is an example of a successive-approximation ADC.
The principal advantage of the three-wire handshake on the GPIB is that it ________.
An offset error in a DAC will show up as an incorrect analog output ________.
Assume that in a certain 4-bit weighted ladder DAC, the input representing the most significant bit is applied to a 20 kΩ resistor. What is the size of the resistor that represents the least significant bit?
A standard logic device can be connected on a bus system as an open-collector logic device by connecting each output to a ________.
Of the methods listed, the fastest A/D conversion is done by a ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion