Incorrect codes are a form of output error for a DAC.

More Questions from Digital Signal Processing

• Digital signal processors must be programmed to perform specific tasks.
• The ADC0804 is an example of a successive-approximation ADC.
• The principal advantage of the three-wire handshake on the GPIB is that it ________.
• An offset error in a DAC will show up as an incorrect analog output ________.
• Assume that in a certain 4-bit weighted ladder DAC, the input representing the most significant bit is applied to a 20 kΩ resistor. What is the size of the resistor that represents the least significant bit?
• A standard logic device can be connected on a bus system as an open-collector logic device by connecting each output to a ________.
• Of the methods listed, the fastest A/D conversion is done by a ________.
• The number of data lines on the GPIB is ________.
• A monotonicity error in a DAC will show up as an incorrect analog output ________.
• The resolution of a DAC can be expressed as the ________.

Discussion & Comments