Curioustab

Home » Mechanical Engineering » Strength of Materials

The section modulus of a circular section about an axis through its C.G., is

πd2/4
πd2/16
πd3/16
πd3/32

Correct Answer: πd3/32

← Previous Question Next Question→

More Questions from Strength of Materials

The hoop stress in a thin cylindrical shell is
Which of the following is the correct torsion equation?
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A pressure vessel is said to be a thin shell when the ratio of wall thickness of the vessel to its diameter is __________ 1/10.
The strength of the shaft is judged by the torque transmitted by the shaft.
When a body is subjected to a direct tensile stress (σx) in one plane accompanied by a simple shear stress (τxy ), the maximum normal stress is
According to Euler's column theory, the crippling load of a column is given by p = π2 EI/Cl2 In this equation, the value of C for a column with both ends hinged, is
A simply supported beam with a gradually varying load from zero at B and w per unit length at A is shown in the below figure. The shear force at B is equal to
The ratio of linear stress to the linear strain is called
When a load on the free end of a cantilever beam is increased, failure will occur

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion