Curioustab

Home » Mechanical Engineering » Strength of Materials

The ratio of linear stress to the linear strain is called

modulus of rigidity
modulus of elasticity
bulk modulus
Poisson's ratio

Correct Answer: modulus of elasticity

← Previous Question Next Question→

More Questions from Strength of Materials

When a load on the free end of a cantilever beam is increased, failure will occur
The length of a conical bar is l, diameter of base is d and weight per unit volume is w. It is fixea at its upper end and hanging freely. The elongation of the bar under the action of its own weight will be
Two closely coiled helical springs 'A' and 'B' are equal in all respects but the diameter of wire of spring 'A' is double that of spring 'B' The stiffness of spring 'B' will be __________ that of spring 'A'
A body is subjected to a direct tensile stress of 300 MPa in one plane accompanied by a simple shear stress of 200 MPa. The maximum normal stress will be
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A body is subjected to a direct tensile stress of 300 MPa in one plane accompanied by a simple shear stress of 200 MPa. The minimum normal stress will be
When a rectangular beam is loaded longitudinally, the shear force develops on the top layer.
When a body is subjected to a direct tensile stress (σx) in one plane accompanied by a simple shear stress (τxy), the maximum shear stress is
In a simply supported beam carrying a uniformly distributed load w per unit length, the point of contraflexure
A riveted joint may fail by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion