A fixed beam is one which is fixed at __________ of its ends.

More Questions from Strength of Materials

• The relation between modulus of elasticity (E) and modulus of rigidity (C) is given by
• The bending moment on a section is maximum where shear force is
• When a bar is subjected to a change of temperature and its deformation is prevented, the stress induced in the bar is
• Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called
• The layer at the centre of gravity of the beam as shown in the below figure, will be
• A simply supported beam 'A' of length l, breadth b and depth d carries a central point load W. Another bream 'B' has the same length and breadth but its depth is doubled. The deflection of beam 'B' will be double as compared to beam 'A'.
• A body is subjected to a direct tensile stress (σ) in one plane. The shear stress is maximum at a section inclined at __________ to the normal of the section.
• The strain energy stored in a hollow circular shaft of outer diameter (D) and inner diameter (d) subjected to shear stress is
• In spring balances, the spring is used
• The compressive strength of brittle materials is __________ its tensile strength.

Discussion & Comments