Curioustab

Home » Mechanical Engineering » Strength of Materials

Fatigue test is carried out for

stresses varying between two limits of equal value, but of opposite sign
stresses varying between two limits of unequal value, but of opposite sign
stresses varying between two limits of unequal value but of same sign
all of the above

Correct Answer: all of the above

← Previous Question Next Question→

More Questions from Strength of Materials

According to Euler's column theory, the crippling load of a column is given by p = π2 EI/Cl2. In the Euler's formula, the value of C for a column with both ends fixed is 4.
When a closely-coiied helical spring of mean diameter (D) is subjected to an axial load (W), the deflection of the spring (δ) is given by (where d = Diameter of spring wire, n = No. of turns of the spring, and C = Modulus of rigidity for the spring material)
If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
In the below figure, the point B represents upper yield point.
Lame's theory is associated with
The centre to centre distance, between two consecutive rivets in a row, is called
Factor of safety is defined as the ratio of
The torsional rigidity of a shaft is expressed by the torque required to produce a twist of one radian per unit length of a shaft.
When a rectangular beam is loaded transversely, the maximum tensile stress is developed on the
For a given stress, the ratio of moment of resistance of a beam of square cross-section when placed with its two sides horizontal to the moment of resistance with its diagonal horizontal, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion