Curioustab

Home » Mechanical Engineering » Strength of Materials

The bending moment on a section is maximum where shear force is

minimum
maximum
changing sign
zero

Correct Answer: changing sign

← Previous Question Next Question→

More Questions from Strength of Materials

When a bar is subjected to a change of temperature and its deformation is prevented, the stress induced in the bar is
Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called
The layer at the centre of gravity of the beam as shown in the below figure, will be
A simply supported beam 'A' of length l, breadth b and depth d carries a central point load W. Another bream 'B' has the same length and breadth but its depth is doubled. The deflection of beam 'B' will be double as compared to beam 'A'.
A body is subjected to a direct tensile stress (σ) in one plane. The shear stress is maximum at a section inclined at __________ to the normal of the section.
The strain energy stored in a hollow circular shaft of outer diameter (D) and inner diameter (d) subjected to shear stress is
In spring balances, the spring is used
The compressive strength of brittle materials is __________ its tensile strength.
When a body is subjected to a direct tensile stress (σx) in one plane accompanied by a simple shear stress (τxy ), the minimum normal stress is
Two solid shafts 'A' and 'B' are made of the same material. The shaft 'A' is of 50 mm diameter and shaft 'B' is of 100 mm diameter. The strength of shaft 'B' is __________ as that of shaft A.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion