In the below figure, __________ represents glass.

More Questions from Strength of Materials

• The pull required to tear off the plate per pitch length is (where p = Pitch of rivets, t = Thickness of plates, and σt, τ and σc = Permissible tensile, shearing and crushing stresses respectively)
• When a thin cvlindrical shell is subjected to an internal pressure, the volumetric strain is (where ε1 = Hoop strain, and ε2 = Longitudinal strain)
• A beam which is fixed at one end and free at the other is called
• The maximum deflection of a fixed beam of length l carrying a total load W uniformly distributed over the whole length is
• The maximum deflection of a cantilever beam of length l with a point load W at the free end is
• In a simple bending theory, one of the assumption is that the plane sections before bending remain plane after bending. This assumption means that
• A thick cylindrical shell having ro and ri as outer and inner radii, is subjected to an internal pressure (p). The minimum tangential stress at the outer surface of the shell is
• The maximum bending moment for a simply supported beam with a gradually varying load from zero at both ends and w per metre at the centre, lies at the centre of a beam.
• Which of the following statement is correct?
• The rivets are used for __________ fastenings.

Discussion & Comments