Curioustab

Home » Mechanical Engineering » IC Engines and Nuclear Power Plants

The purpose of testing an internal combustion engine is

to determine the information, which can not be obtained by calculations
to conform the data used in design, the validity of which may be doubtful
to satisfy the customer regarding the performance of the engine
all of the above

Correct Answer: all of the above

Next Question→

More Questions from IC Engines and Nuclear Power Plants

The thermal efficiency of a standard Otto cycle for a compression ratio of 5.5 will be
Where reactor operation is designed with fast neutrons such as in reactors using highly enriched fuel, the moderator used is
The compensating jet in a carburettor supplies almost constant amount of petrol at all speeds because the
Pre-ignition is caused by the spontantaneous combustion of the mixture before the end of the compression stroke, and is due to
In a four stroke cycle petrol engine, the inlet valve
A carburettor is used to supply
The nuclear power station at Tarapur has the reactor of the __________ type.
A diesel engine has
The pressure inside the cylinder is __________ the atmospheric pressure during the exhaust stroke.
In open combustion chamber in diesel engines, the shape and layout of the piston crown, the inlet port and the valve produce the turbulent effect of fuel mixture.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion