Flash A/D converters depend on an input clock pulse to perform each conversion.

More Questions from Interfacing to the Analog World

• The time required to complete a conversion cycle is called conversion time.
• An operational amplifier is used as a comparator.
• In a counter-ramp A/D converter, the end-of-conversion line must be tied back to the clear input of the counter to change the circuit to perform continuous conversions.
• When analog inputs from several sources are to be converted, a multiplexing technique can be used so that one ADC may be time-shared.
• A D/A converter changes things such as temperature variations into digital quantities.
• In a binary-weighted D/A converter the sum of all the currents from the binary weighted resistors flows through the operational amplifier.
• The main advantage of the SAR ADC method is its high speed.
• Resolution in the analog output of a DAC is primarily dependent on the number of input binary bits.
• The delay between a change on the digital input of a DAC and the appearance of the change on the output is called settling time.
• The DSO ________, ________, and ________ analog waveforms.

Discussion & Comments