Curioustab

Home » Electronics » Series-Parallel Circuits

What are the branch currents I2 and I3?

I2 = 4 mA, I3 = 2 mA
I2 = 4.5 mA, I3 = 2.5 mA
I2 = 2.5 mA, I3 = 1.5 mA
I2 = 5.5 mA, I3 = 3.5 mA

Correct Answer: I2 = 2.5 mA, I3 = 1.5 mA

← Previous Question Next Question→

More Questions from Series-Parallel Circuits

The current flowing through an unloaded voltage divider is called the:
If R1 is in series with a parallel combination of R2, R3, and R4, when the resistance value of R2 increases, the voltage across R3 will
What is the power dissipated by R2, R4, and R6?
In a series–parallel circuit consisting of R1 and R2 in series and connected in parallel with R3, if R1 opens, then R2's voltage will:
Which circuit fault do the meter readings in the given figure indicate?
Components or combinations of components with common currents, in a series–parallel circuit, are in:
If the load in the given circuit is 80 kΩ , what is the bleeder current?
How much voltage is dropped across R3 in the given circuit?
With 21 V applied, if R1 = 5 ohms, R2 = 35 ohms, and R3 = 14 ohms, what is the current of R2 if R1 is series connected with parallel circuit R2 and R3?
When a load is connected to a voltage divider, the total resistance of the circuit will:

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion