A dc chopper is feeding an RLE load. The maximum steady state ripple is

More Questions from Power Electronics

• In a 3 phase full wave regulator feeding resistance load connected in star, the possible range of firing angle a is
• In a single phase full wave converter (M - 2 connection), the rms transformer voltage is 300 V across each half of secondary. The PIV for each thyristor is
• In a single phase full wave regulator feeding R-L load, the minimum firing angle can be zero.
• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is
• Current chopping leads to
• A reactor is used in a dual converter operating in non-circulating current mode.
• Assertion (A): The gate current of an SCR is always in the form of pulses. Reason (R): The gate losses, in pulse triggering, are low.
• In integral cycle control the period of on-off control should be more than mechanical time constant of load.
• Two semiconverters are connected in series to form a single phase series converter. The input v = Vm sin ωt and a1 = a2 are the firing angles of the two converters. If a1 = a2 = 0, the dc output voltage is
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be

Discussion & Comments