Solve this multiple-choice question and choose the correct option.

Home » Mechanical Engineering » Production Engineering

Drill with zero rake: identify the tool type A drill that effectively has zero rake angle (scraping action) is termed what? Choose the correct name.

Difficulty: Easy

Flat drill
Straight fluted drill
Parallel shank twist drill
Tapered shank twist drill

Correct Answer: Flat drill

Explanation:

Concept/ApproachA flat (spade-type) drill removes material primarily by a scraping/zero-rake action, unlike twist drills which have positive rake cutting lips and helical flutes for chip evacuation.

Final AnswerFlat drill

← Previous Question Next Question→

More Questions from Production Engineering

Chip formation: materials producing segmental (discontinuous) chips Segmental or discontinuous chips are most commonly formed during machining of which material? Choose the correct option.
Cutting velocity definition in machining Evaluate the statement: “The velocity of the tool relative to the workpiece is known as the cutting velocity.” Choose the correct truth value.
Recommended HSS cutting speed: turning brass Select the typical average cutting speed range for turning brass using a high-speed steel (HSS) tool under standard conditions. Choose the best range.
Twist drill material selection Twist drills are commonly manufactured from which materials? Choose the most accurate option.
High-volume production of small, slender parts: machine tool choice Which machine gives maximum production efficiency for small, long, and slender turned parts? Choose the correct lathe type.
Push broach vs. pull broach: geometric and cutting differences Compared to a pull broach, a push broach typically: Choose the correct set of characteristics.
Oblique cutting mechanics: chip-thickness distribution along the cutting edge In an oblique cutting system (helical/inclined cutting edge with chip flow not perpendicular to the edge), where does the maximum chip thickness tend to occur across the engaged edge? Choose the correct evaluation of the statement: “the maximum chip thickness occurs at the middle.”
Definition check: what is a fixture in manufacturing? Multiple closely related shop devices are listed (jig, fixture, gauge). Choose the correct definition of a fixture.
Lathe practice: feed direction for a round-nose turning tool A round-nose tool is used for turning/finishing on a lathe. Can it be fed from left→right or right→left along the bed? State the correct evaluation.
Chip-thickness variation in up (conventional) milling In up milling, how does the instantaneous chip thickness vary from the start to the end of the tooth engagement? Choose the correct pattern.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion