logo

CuriousTab

CuriousTab

Discussion


Home Digital Electronics Programmable Logic Device Comments

  • Question
  • FLEX10K devices are generally classified as ________.


  • Options
  • A. PLDs
  • B. FPGAs
  • C. HCPLDs
  • D. CPLDs

  • Correct Answer
  • FPGAs 


  • Programmable Logic Device problems


    Search Results


    • 1. The programming technologies that are used in FPGA devices include SRAM, flash, and antifuse, with ________ being the most common.

    • Options
    • A. SRAM
    • B. flash
    • C. antifuse
    • D. SRAM and flash
    • Discuss
    • 2. Design costs for standard cell ASICs are ________ those for MPGAs.

    • Options
    • A. lower than
    • B. about the same as
    • C. higher than
    • D. none of the above
    • Discuss
    • 3. An EPM 7128S in a ________ PQFP package has 12 I/O per LAB plus 4 additional input-only pins for a total of 100 pins.

    • Options
    • A. 100-pin
    • B. 120-pin
    • C. 140-pin
    • D. 160-pin
    • Discuss
    • 4. In a GAL16V8, the D flip-flops contained in the OLMCs have ________ and ________.

    • Options
    • A. asynchronous reset, synchronous preset
    • B. asynchronous preset, synchronous reset
    • C. asynchronous clear, synchronous set
    • D. asynchronous set, synchronous clear
    • Discuss
    • 5. The distinction between CPLDs and FPGAs is ________.

    • Options
    • A. well known
    • B. very small
    • C. often fuzzy
    • D. very large
    • Discuss
    • 6. A macrocell is ________.

    • Options
    • A. part of a PAL or GAL
    • B. a type of one-time programmable SPLD
    • C. an example of intellectual property
    • D. a logic array block
    • Discuss
    • 7. In the MAX7000S device up to ________ signals can feed each LAB from the PIA.

    • Options
    • A. 0
    • B. 18
    • C. 36
    • D. 72
    • Discuss
    • 8. A GAL22V10 ________.

    • Options
    • A. has up to 32 inputs and 10 outputs
    • B. is a type of SPLD
    • C. has 10 inputs and 22 outputs
    • D. is downloadable from the manufacturer's Web site
    • Discuss
    • 9. A method for the automated testing of printed circuit boards is called a(n) ________.

    • Options
    • A. bed-of-nails
    • B. LUT
    • C. CLB
    • D. CPLD
    • Discuss
    • 10. In a programmable logic device circuit diagram, the inputs to each of the OR gates are designated by ________.

    • Options
    • A. a dot
    • B. a bus
    • C. a single line
    • D. 4 inputs
    • Discuss


    Comments

    There are no comments.

Enter a new Comment