logo

CuriousTab

CuriousTab

Discussion

Home ‣ Digital Electronics ‣ Flip-Flops Comments
  • Question

  • The advantage of a J-K flip-flop over an S-R FF is that ________.


  • Options
  • A. it has fewer gates
  • B. it has only one output
  • C. it has no invalid states
  • D. it does not require a clock input

  • Correct Answer
  • it has no invalid states 

    • Flip-Flops problems

    Search Results

    • 1. When the output of the NOR gate S-R flip-flop is in the HOLD state (no change), the inputs are ________.

    • Options
    • A. S = 1, R = 1
    • B. S = 1, R = 0
    • C. S = 0, R = 1
    • D. S = 0, R = 0
      • Discuss
    • 2. The postponed symbol () on the output of a flip-flop identifies it as being ________.

    • Options
    • A. a D flip-flop
    • B. a J-K flip-flop
    • C. pulse triggered
    • D. trailing edge-triggered
      • Discuss
    • 3. A gated S-R flip-flop is in the hold condition whenever ________.

    • Options
    • A. the Gate Enable is HIGH
    • B. the Gate Enable is LOW
    • C. the S and R inputs are both LOW
    • D. the Gate Enable is HIGH and the S and R inputs are both LOW
      • Discuss
    • 4. A positive edge-triggered flip-flop will accept inputs only when the clock ________.

    • Options
    • A. is LOW
    • B. changes from HIGH to LOW
    • C. is HIGH
    • D. changes from LOW to HIGH
      • Discuss
    • 5. A gated D latch does not have ________.

    • Options
    • A. a clock input
    • B. an enable input
    • C. a output
    • D. steering gates
      • Discuss
    • 6. A major drawback to an latch is its ________.

    • Options
    • A. complexity
    • B. slow speed
    • C. invalid condition
    • D. latch mode
      • Discuss
    • 7. The action of ________ a FF or latch is also called resetting.

    • Options
    • A. breaking
    • B. clearing
    • C. freeing
    • D. changing
      • Discuss
    • 8. The ________ is the time interval immediately following the active transition of the clock signal.

    • Options
    • A. hold time
    • B. setup time
    • C. over-time
    • D. hang-time
      • Discuss
    • 9. The toggle mode is the mode in which a(n) ________ changes states for each clock pulse.

    • Options
    • A. logic level
    • B. flip-flop
    • C. edge-detector circuit
    • D. toggle detector
      • Discuss
    • 10. Assume an latch, made from cross-coupled NAND gates, has a 0 on both inputs. The outputs will be ________.

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.