Discussion
Home ‣ Digital Electronics ‣ Interfacing to the Analog World Comments
- Question
On a binary-weighted D/A converter the least significant binary input ________.
Options- A. connects to the smallest resistor
- B. supplies the least voltage
- C. connects to a 1 kΩ resistor
- D. connects to the largest resistor
- Correct Answer
- connects to the largest resistor
- 1. The characteristic that a change of one binary step on the input of a DAC should cause exactly one step change on the output is called ________.
Options- A. resolution
- B. linearity
- C. monotonicity
- D. accuracy Discuss
- 2. The input of an analog-to-digital converter is ________.
Options- A. a voltage level
- B. a clock pulse
- C. a binary number
- D. any of the above Discuss
- 3. A major application for DSP is in ________ and ________ of analog signals.
Options- A. sending, receiving
- B. digitizing, weighting
- C. filtering, conditioning
- D. leveling, translating Discuss
- 4. A simultaneous A/D converter is also known as a(n) ________ A/D converter.
Options- A. flash
- B. synchronous
- C. comparator
- D. asynchronous Discuss
- 5. There are many applications in which analog data must be digitized and transferred into a computer's memory. The process by which the computer acquires these digitized analog data is referred to as ________.
Options- A. sampling
- B. multiplexing
- C. data acquisition
- D. prescaling Discuss
- 6. ________ ADCs use no clock signal, because there is no timing or sequencing required.
Options- A. Actuator
- B. Dual
- C. Flash
- D. Bipolar Discuss
- 7. The circuit shown below is a(n) ________.
Options- A. R/2R ladder D/A converter
- B. four-bit decoder
- C. binary-weighted-input DAC
- D. four-bit A/D converter Discuss
- 8. A counter-ramp ADC uses a comparator to compare the input voltage with ________.
Options- A. a binary number
- B. the output of a counter
- C. the output of a DAC
- D. a voltage divider network Discuss
- 9. A counter-ramp ADC stops counting when ________.
Options- A. the input voltage equals the DAC staircase voltage
- B. the counter reaches a maximum count
- C. the input voltage equals 5 volts
- D. the DAC staircase voltage equals 5 volts Discuss
- 10. The main advantage of the tracking A/D converter over the stairstep-ramp A/D converter is that ________.
Options- A. it does not require a counter
- B. it uses an up/down counter to indicate the polarity of the input voltage
- C. it uses an up/down counter to measure both positive and negative voltages
- D. it is faster Discuss
Interfacing to the Analog World problems
Search Results
Correct Answer: monotonicity
Correct Answer: a voltage level
Correct Answer: filtering, conditioning
Correct Answer: flash
Correct Answer: data acquisition
Correct Answer: Flash
Correct Answer: binary-weighted-input DAC
Correct Answer: the output of a DAC
Correct Answer: the input voltage equals the DAC staircase voltage
Correct Answer: it is faster
Comments
There are no comments.More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.