logo

CuriousTab

CuriousTab

Discussion

Home ‣ Digital Electronics ‣ Interfacing to the Analog World Comments
  • Question

  • When the analog input to a tracking A/D converter is at a constant level, the digital output will oscillate.


  • Options
  • A. True
  • B. False

  • Correct Answer
  • True 

    • Interfacing to the Analog World problems

    Search Results

    • 1. The output of an analog-to-digital converter is a voltage level.

    • Options
    • A. True
    • B. False
      • Discuss
    • 2. A data acquisition system may communicate via two common buses: the data bus and the control bus.

    • Options
    • A. True
    • B. False
      • Discuss
    • 3. When the inputs of a four-bit D/A converter are connected to a binary up-counter, the output looks like an upward sloping line.

    • Options
    • A. True
    • B. False
      • Discuss
    • 4. A sample-and-hold circuit is used in D/A conversion.

    • Options
    • A. True
    • B. False
      • Discuss
    • 5. The current across the MSB "rung" of a 4-bit R/2R ladder DAC if the reference voltage is 5 v and R is 8 Ω is 625 µA.

    • Options
    • A. True
    • B. False
      • Discuss
    • 6. A DAC is monotonic if its output increases as its binary input is incremented from one value to the next.

    • Options
    • A. True
    • B. False
      • Discuss
    • 7. To be useful, A/D or D/A converters must have meaningful representation of the analog quantity and a digital representation and the digital quantity as an analog representation.

    • Options
    • A. True
    • B. False
      • Discuss
    • 8. When a DAC output shows a deviation of the measured step size from the ideal step size, this error is called nonlinearity.

    • Options
    • A. True
    • B. False
      • Discuss
    • 9. An eight-bit D/A converter has a resolution of 0.125.

    • Options
    • A. True
    • B. False
      • Discuss
    • 10. If the least significant bit (LSB) of a four-bit binary-weighted resistor D/A converter connects to a 200 Ω resistor, then the resistor needed for the next bit is 100 Ω.

    • Options
    • A. True
    • B. False
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.