Home » Electronics and Communication Engineering » Matching Questions

Match the following: List I (Modulation ) List II (Modulation Index) A. DSBFC 1. μ > 1 B. DSBSC 2. μ > 0 C. SSB 3. ∞ 4. μ, any value

A-2, B-2, C-3
A-1, B-3, C-3
A-4, B-2, C-1
A-2, B-3, C-1

Correct Answer: A-2, B-2, C-3

← Previous Question Next Question→

More Questions from Matching Questions

Match the following: List I (Microwave device) List II (Application) A. Reflex Klystron 1. Wideband amplification B. TWT 2. Very low power amplification C. Cavity Klystron 3. Low power FM generation D. Maser 4. Frequency multiplication
Match the following: List I (Microwave device) List II (Application) A. PIN diode 1. Microwave amplification B. GaAs MOSFET 2. Low noise microwave generation C. Transferred electron device 3. Electronic tuning of MW oscillator D. Varactor diode 4. Light wave detection
Match the following: List I (Set operation) List II (Set operator) A. Set equality 1. - B. Set inclusion 2. = C. Set intersection 3. < = D. Set difference 4. ∗
Match the following: List I List II A. Conductor 1. B. Semiconductor 2. C. Insulator 3.
Match the following: List I List II A. Silicon 1. Donor Impurity B. Antimony 2. Acceptor Impurity C. Gallium 3. Most Commonly used semiconductor material D. Germanium 4. Atomic number 32
Match the following: List I (Characteristic equation) List II (Degree of damping) A. s2 + 15s + 56.25 1. Undamped B. s2 + 5s + 6 2. Underdamped C. s2 + 20.25 3. Critically damped D. s2 + 4.55s + 42.25 4. Overdamped
Match the following: List I List II A. 1. v(t) = u(t + 1) B. 2. v(t) = u(t) - 2u(t - 1) + 2u(t - 2) - 2u(t - 3).... C. 3. v(t) = u(t - 1) - u(t - 3) D. 4. v(t) = δ(t - 1)
Match the following: List I List II A. lag compensation 1. Exterior of unit circle |z| = 1 B. lead compensation 2. PD control C. stability 3. Non-minimum phase D. Instability 4. Left half s plane 5. PI control
Match the following: List I (Properties) List II (Relations) A. Linear but NOT time-invariant 1. y(t) = t2x(t) B. Time-invariant but NOT linear 2. y(t) = t |x(t)| C. Linear and time invariant 3. y(t) = |x(t)| 4. y(t) = x(t - 5)
Match the following: List I List II A. Poles and zeros of lie an real axis driving point LC network 1. lie an real axis B. Canonic LC network has 2. a zero C. The number of Canonic networks for the given driving point function 3. minimum number of elements D. The first critical frequency nearest the origin for RL driving point impedance 4. four 5. minimum number of elements 6. alternate 7. either a pole or zero 8. three

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion