If the main reinforcement of the slab is parallel to a T-beam, the transverse re

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Structural Design Specifications Comments

Question
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least ......of main reinforcement
Options
A. 40%
B. 50%
C. 60%
D. 70%.

Correct Answer

60%

Structural Design Specifications problems

Search Results

1. To achieve uniform colour and consistency of the concrete by using ordinary Portland cement, the mixing time may be
Options
A. to 1 minute
B. 1 to minutes
C. to 2 minutes
D. 2 to minutes
E. none of these.

3. If b is actual width of a flange, D_t is the thickness of the flange, b_? is the breath of the web, l_o is the distance between the points of zero moments in a beam, the effective width of the flange, is
Options
A.
B.
C.
D.

4. Pick up the correct statement from the following:
Options
A. For steel castings, the minimum tensile strength is 41 kg/mm² and minimum yield stress is 20.5 kg/mm²
B. For mild steel the minimum tensile strength is 44 kg/mm² and minimum elongation of 23% on a gauge length of 5.65A
C. For high tensile steel, the minimum tensile strength is 58 kg/mm²
D. All the above.

5. In the formula a + bk for the calculation of the net effective section of single tee in tension connected by flange to the same side of the same side of the gusset, the value of 'k' is taken
Options
A.
B.
C.
D.

Comments

More in Civil Engineering: