In case of a hair pin bend of a highway, minimum radius of inner curve is 14 m m

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Highway Engineering Comments

Question
In case of a hair pin bend of a highway,
Options
A. minimum radius of inner curve is 14 m
B. minimum radius of transition is 15 m
C. circular compound curve may be provided
D. minimum road way width at apex for single lane highway, is 9 m
E. All the above.

Correct Answer

All the above.

Highway Engineering problems

Search Results

1. Pick up the incorrect statement from the following. If water cement ratio is
Options
A. increased, strength of concrete increases
B. decreased, strength of concrete increases
C. increased, strength of concrete is not affected
D. none of these.

3. The desirable camber for straight roads with water bound macadam or gravel surface, is
Options
A. 1 in 33 to 1 in 25
B. 1 in 40 to 1 in 33
C. 1 in 150 to 1 in 140
D. 1 in 160 to 1 in 140
E. none of these.

6. Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as
Options
A. traffic density of lane
B. basic capacity of lane
C. probable capacity of lane
D. practical capacity of lane.

8. Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made
Options
A. to have a reduced fall
B. horizontal
C. to have slope of the camber on the other half of the carriageway
D. none of these.

9. If E is the modulus of elasticity of the concrete in kg/cm², d is the slab thickness in cm, is the Poisson's ratio for the concrete, k is the sub-grade modulus kg/cm³, the radius r of relative stiffness in cm,
Options
A.
B.
C.
D.

Comments

More in Civil Engineering: