Discussion
Home ‣ Civil Engineering ‣ Water Supply Engineering Comments
- Question
The total domestic consumption in a city water supply, is assumed
Options- A. 20%
- B. 30%
- C. 40%
- D. 60%.
- Correct Answer
- 60%.
- 1. If average volume of sediment deposits is one-tenth million cubic metres per year in a reservoir of total capacity 10 million cubic metres, the dead storage will be filled up, in
Options- A. 10 years
- B. 15 years
- C. 20 years
- D. 25 years
- E. 50 years. Discuss
- 2. Ground water from artesian wells
Options- A. contains no suspended materials
- B. contains dissolved salts
- C. may be saltish and hard
- D. generally require lesser treatment
- E. all the above. Discuss
- 3. Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between
Options- A. 250 to 500
- B. 500 to 750
- C. 750 to 1000
- D. 1000 to 1250 Discuss
- 4. The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called
Options- A. Working pressure
- B. Design pressure
- C. Test pressure
- D. Hydrostatic pressure. Discuss
- 5. The ensure proper growth of children's teeth, the quantity of flouride used in water mains, is
Options- A. 1 mg/litre
- B. 2 mg/litre
- C. 3 mg/litre
- D. 4 mg/litre
- E. 5 mg/litre. Discuss
- 6. In distribution pipes, air valves are provided at
Options- A. lower points
- B. junction points
- C. higher points
- D. any where. Discuss
- 7. The maximum permissible chloride content in treated water of public water supplies should not exceed
Options- A. 50 P.P.M.
- B. 100 P.P.M.
- C. 150 P.P.M.
- D. 200 P.P.M.
- E. 250 P.P.M. Discuss
- 8. The bacterias which may survive with or without free oxygen, are called
Options- A. Aerobic bacterias
- B. Anaerobic bacterias
- C. Faculative bacteria's
- D. None of these. Discuss
- 9. The most important and widely used tube well in India, is
Options- A. strainer well
- B. cavity well
- C. slotted well
- D. perforated pipe well. Discuss
- 10. For a city developed haphazardly, the layout of distribution pipes preferred to, is
Options- A. ring system
- B. radial system
- C. grid iron system
- D. dead end system. Discuss
Water Supply Engineering problems
Search Results
Correct Answer: 25 years
Correct Answer: all the above.
Correct Answer: 1000 to 1250
Correct Answer: Test pressure
Correct Answer: 1 mg/litre
Correct Answer: higher points
Correct Answer: 250 P.P.M.
Correct Answer: Faculative bacteria's
Correct Answer: strainer well
Correct Answer: dead end system.
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.