If d is the diameter of the pipe, p is the total internal pressure, f is the per

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Water Supply Engineering Comments

Question
If d is the diameter of the pipe, p is the total internal pressure, f is the permissible tensile stress and n is the effective of the joint, the thickness t of metal pipe, is
Options
A.
B.
C.
D.
E. none of these.

Correct Answer

Water Supply Engineering problems

Search Results

1. Pick up the correct statement from the following :
Options
A. A hydrograph is a plot of discharge versus time
B. A mass curve is a plot of accumulated flow versus time
C. The mass curve continuously rises
D. The slope of the mass curve at any time is a measure of the inflow rate at that time
E. All the above.

6. Pick up the correct statement from the following :
Options
A. The amount of rainfall in 24 hours, is known as daily rainfall
B. The amount of rainfall in one year, is known as annual rainfall
C. The rain cycle period in India is taken as 35 years
D. The ratio of the actual rainfall in the year to the normal rainfall at a place, is called index of the wetness
E. All the above.

8. At the socket and spigot joint,
Options
A. enlarged end of the pipe is called socket
B. normal end of the pipe is called spigot
C. spigot is fitted into the socket
D. molten lead is used for water proofing
E. all the above.

10. Check valves are installed
Options
A. on the delivery side of the pumping set
B. at the interconnections between polluted water system and a potable water system
C. both (a) and (b)
D. neither (a) nor (b).

Comments

More in Civil Engineering: