Discussion
Home ‣ Civil Engineering ‣ Soil Mechanics and Foundation Engineering Comments
- Question
Pick up the correct statement from the following:
Options- A. In hydrometer method, weight Wd per ml of suspension is found directly
- B. In pipette analysis, weight Wd per ml of suspension is found indirectly
- C. In pipette analysis, weight Wd per ml of suspension is found directly
- D. None of these.
- Correct Answer
- In pipette analysis, weight Wd per ml of suspension is found directly
- 1. The change of moisture content of soils, changes the
Options- A. value of the angle of repose
- B. amount of compaction required
- C. cohesive strength of soil
- D. all the above. Discuss
- 2. The void ratio of the soil sample stated in Q. No. 216, is
Options- A. 0.4
- B. 0.5
- C. 0.6
- D. 0.75 Discuss
- 3. When a cohesionless soil attains quick condition, it looses
Options- A. shear strength
- B. bearing capacity
- C. both (a) and (b)
- D. neither (a) nor (6). Discuss
- 4. A failure wedge develops if a retaining wall
Options- A. moves away from the backfill
- B. moves towards the backfill
- C. sinks downwards
- D. stresses equally by vertical and horizontal forces. Discuss
- 5. For general engineering purposes, soils are classified by
Options- A. particle size classification system
- B. textural classification system
- C. High Way Research Board (HRB), classification system
- D. unified soil classification system. Discuss
- 6. Cohesionless soil is
Options- A. sand
- B. silt
- C. clay
- D. clay and silt. Discuss
- 7. The maximum pressure which a soil can carry without shear failure, is called
Options- A. safe bearing capacity
- B. net safe bearing capacity
- C. net ultimate bearing capacity
- D. ultimate bearing capacity. Discuss
- 8. Pick up the correct statement from the following:
Options- A. Coefficient of compressibility is the decrease in void ratio per unit increase of pressure
- B. The percent settlement at any time is called degree of consolidation
- C. Time factor is a dimensionless quantity
- D. The initial curve on either side of the point of unloading and reloading is called 'virgin curve'
- E. All the above. Discuss
- 9. The area of cross-section A at failure or during any stage of Triaxial Compression Test and its initial length (L) and volume (V), are related by the equation
Options- A.
- B.
- C.
- D.
Discuss
- 10. Pick up the correct definition from the following:
Options- A. The lateral pressure exerted by the soil when the retaining wall moves away from the back fill, is generally known as active earth pressure of the soil
- B. The lateral pressure exerted by the soil when the retaining wail moves towards the soil, is generally known as 'Passive earth pressure of the soil'
- C. The lateral pressure exerted by the soil when the retaining wall has no movement relative to the back fill, is known as 'earth pressure at rest of the soil'
- D. All the above. Discuss
Soil Mechanics and Foundation Engineering problems
Search Results
Correct Answer: all the above.
Correct Answer: 0.6
Correct Answer: both (a) and (b)
Correct Answer: moves away from the backfill
Correct Answer: unified soil classification system.
Correct Answer: sand
Correct Answer: safe bearing capacity
Correct Answer: All the above.
Correct Answer:
Correct Answer: All the above.
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.