logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Surveying Comments

  • Question
  • The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is


  • Options
  • A. 80° 30'
  • B. 99° 30'
  • C. 70° 30'
  • D. none of these

  • Correct Answer
  • 70° 30' 


  • Surveying problems


    Search Results


    • 1. To set out a parallel from a given inccessible point to a given line AB, the following observations and made
      Distance AB and angle PAM = a and angle PBA = b are measured where Mis a point on the line BA produced. The perpendicular to the desired parallel line from A and B are :

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 2. While measuring with a metallic tape of 30 m length pull should be applied

    • Options
    • A. 1 kg
    • B. 2 kg
    • C. 3 kg
    • D. 4 kg
    • Discuss
    • 3. In levelling operation,

    • Options
    • A. The first sight on any change point is a back sight
    • B. The second sight on any change point is a fore sight
    • C. The line commences with a fore sight and closes with a back sight
    • D. The line commences with a back sight and closes with a foresight.
    • Discuss
    • 4. Ranging in chain survey means

    • Options
    • A. looking at an isolated point not on the line
    • B. establishing an intermediate point on the line
    • C. determining the distance between end points
    • D. determining the offset distance
    • E. none of these
    • Discuss
    • 5. If the radius of a simple curve is 600 m, the maximum length of the chord for calculating offsets, is taken

    • Options
    • A. 10 m
    • B. 15 m
    • C. 20 m
    • D. 25 m
    • E. 30 m.
    • Discuss
    • 6. The ratio of the radius and apex distance of a curve deflecting through ?°, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 7. Surveys which are carried out to depict mountains, rivers, water bodies, wooded areas and other cultural details, are known as

    • Options
    • A. cadastral surveys
    • B. city surveys
    • C. topographical surveys
    • D. guide map surveys
    • E. plane surveys.
    • Discuss
    • 8. The ratio of the distances at which a stated length can be distinguished by the telescope and the human eye, respectively, is called

    • Options
    • A. brightness of telescope
    • B. magnification of telescope
    • C. resolving power of telescope
    • D. none of these.
    • Discuss
    • 9. A lemniscate curve between the tangents will be transitional throughout if the polar deflection angle of its apex, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 10. The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known

    • Options
    • A. levelling
    • B. centering
    • C. orientation
    • D. setting.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment