logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • Rivets are generally specified by


  • Options
  • A. thickness of plates to be joined
  • B. overall length
  • C. shank diameter
  • D. diameter of head

  • Correct Answer
  • shank diameter 


  • Strength of Materials problems


    Search Results


    • 1. In a cantilever beam of length l subjected to a uniformly distributed load of w per unit length, the maximum deflection lies at the fixed end.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 2. According to Euler's column theory, the crippling load for a column of length (l) with one end fixed and the other end free is __________ the crippling load for a similar column hinged at both the ends.

    • Options
    • A. equal to
    • B. less than
    • C. more than
    • Discuss
    • 3. The slenderness ratio is the ratio of

    • Options
    • A. area of column to least radius of gyration
    • B. length of column to least radius of gyration
    • C. least radius of gyration to area of column
    • D. least radius of gyration to length of column
    • Discuss
    • 4. According to Euler's column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends.

    • Options
    • A. equal to
    • B. two times
    • C. four times
    • D. eight times
    • Discuss
    • 5. Compression members always tend to buckle in the direction of the

    • Options
    • A. axis of load
    • B. perpendicular to the axis of load
    • C. minimum cross section
    • D. least radius of gyration
    • Discuss
    • 6. When one plate overlaps the other and the two plates are riveted together with two rows of rivets, the joint is known as

    • Options
    • A. single riveted lap joint
    • B. double riveted lap joint
    • C. double riveted single cover butt joint
    • D. double riveted double cover butt joint
    • Discuss
    • 7. A beam of uniform strength may be obtained by

    • Options
    • A. keeping the width uniform and varying the depth
    • B. keeping the depth uniform and varying the width
    • C. varying the width and depth both
    • D. any one of the above
    • Discuss
    • 8. A bar of length L metres extends by l mm under a tensile force of P. The strain produced in the bar is

    • Options
    • A. l/L
    • B. 0.1 l/L
    • C. 0.01 l/L
    • D. 0.001 l/L
    • Discuss
    • 9. The maximum deflection of a fixed beam carrying a central point load lies at

    • Options
    • A. fixed ends
    • B. centre of beam
    • C. l/3 from fixed ends
    • D. none of these
    • Discuss
    • 10. A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The minimum normal stress will be

    • Options
    • A. 400 MPa
    • B. 500 MPa
    • C. 900 MPa
    • D. 1400 MPa
    • Discuss


    Comments

    There are no comments.

Enter a new Comment