logo

CuriousTab

CuriousTab

Discussion

Home ‣ Mechanical Engineering ‣ Strength of Materials Comments
  • Question

  • The maximum tangential stress in a thick cylindrical shell is always __________ the internal pressure acting on the shell.


  • Options
  • A. equal to
  • B. less than
  • C. greater than

  • Correct Answer
  • greater than 

    • Strength of Materials problems

    Search Results

    • 1. A thin spherical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p). The stress in the shell material is

    • Options
    • A. pd/t
    • B. pd/2t
    • C. pd/4t
    • D. pd/8t
      • Discuss
    • 2. An overhanging beam must overhang on both sides.

    • Options
    • A. Correct
    • B. Incorrect
      • Discuss
    • 3. The Rankine's theory for active earth pressure is based on the assumption that

    • Options
    • A. the retained material is homogeneous and cohesionless
    • B. the frictional resistance between the retaining wall and the retained material is neglected
    • C. the failure of the retained material takes place along a plane called rupture plane
    • D. all of the above
      • Discuss
    • 4. The elongation of a conical bar under its own weight is __________ that of prismatic bar of the same length.

    • Options
    • A. equal to
    • B. half
    • C. one-third
    • D. two-third
      • Discuss
    • 5. The efficiency of a riveted joint is the ratio of the strength of the joint to the strength of the solid plate.

    • Options
    • A. True
    • B. False
      • Discuss
    • 6. The bending moment in the centre of a simply supported beam carrying a uniformly distributed load of w per unit length is

    • Options
    • A. zero
    • B. wl2/2
    • C. wl2/4
    • D. wl2/8
      • Discuss
    • 7. The strain energy stored in a spring, when subjected to maximum load, without suffering permanent distortion, is known as

    • Options
    • A. impact energy
    • B. proof resilience
    • C. proof stress
    • D. modulus of resilience
      • Discuss
    • 8. The given figure shows the Mohr's circle of stress for two unequal and like principal stresses (?x and ?y) acting at a body across two mutually perpendicular planes. The normal stress on an oblique section making an angle ? with the minor principle plane is given by

    • Options
    • A. OC
    • B. OP
    • C. OQ
    • D. PQ
      • Discuss
    • 9. If percentage reduction in area of a certain specimen made of material 'A' under tensile test is 60% and the percentage reduction in area of a specimen with same dimensions made of material 'B' is 40%, then

    • Options
    • A. the material A is more ductile than material B
    • B. the material B is more ductile than material A
    • C. the ductility of material A and B is equal
    • D. the material A is brittle and material B is ductile
      • Discuss
    • 10. A lap joint is always in __________ shear.

    • Options
    • A. single
    • B. double
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.