Discussion
Home ‣ Mechanical Engineering ‣ Steam Nozzles and Turbines Comments
- Question
The nozzle efficiency is the ratio of
Options- A. workdone on the blades to the energy supplied to the blades
- B. workdone on the blades per kg of steam to the total energy supplied per stage per kg of steam
- C. energy supplied to the blades per kg of steam to the total energy supplied per stage per kg of steam
- D. none of the above
- Correct Answer
- energy supplied to the blades per kg of steam to the total energy supplied per stage per kg of steam
- 1. The efficiency ratio is the ratio of total useful heat drop to the total isentropic heat drop.
Options- A. Agree
- B. Disagree Discuss
- 2. The compounding of turbines is done in order to
Options- A. reduce speed of rotor
- B. improve efficiency
- C. reduce exit losses
- D. all of these Discuss
- 3. In an impulse turbine
Options- A. the steam is expanded in nozzles only and there is a pressure drop and heat drop
- B. the steam is expanded both in fixed and moving blades continuously
- C. the steam is expanded in moving blades only
- D. the pressure and temperature of steam remains constant Discuss
- 4. A single stage impulse turbine with a diameter of 1.2 m runs at 3000 r.p.m. If the blade speed ratio is 0.42, then the inlet velocity of steam will be
Options- A. 79 m/s
- B. 188 m/s
- C. 450 m/s
- D. 900 m/s Discuss
- 5. The discharge through a nozzle is maximum for a certain value of exit pressure. This pressure is known as critical pressure.
Options- A. Agree
- B. Disagree Discuss
- 6. The ratio of the cumulative heat drop to the isentropic heat drop is called reheat factor.
Options- A. Yes
- B. No Discuss
- 7. When the nozzle operates with the maximum mass flow, the nozzle is said to be
Options- A. choked
- B. underdamping
- C. overdamping
- D. none of these Discuss
- 8. In a De-Laval impulse turbine, the nozzle is kept very close to the blades.
Options- A. Yes
- B. No Discuss
- 9. Reheating of steam in a turbine
Options- A. increases the workdone through the turbine
- B. increases the efficiency of the turbine
- C. reduces wear on the blades
- D. all of these Discuss
- 10. In a velocity compounded impulse turbine, when steam flows through the second row of moving blades,
Options- A. velocity increases
- B. velocity decreases
- C. velocity remains constant
- D. pressure remains constant Discuss
Steam Nozzles and Turbines problems
Search Results
Correct Answer: Agree
Correct Answer: all of these
Correct Answer: the steam is expanded in nozzles only and there is a pressure drop and heat drop
Correct Answer: 450 m/s
Correct Answer: Agree
Correct Answer: Yes
Correct Answer: choked
Correct Answer: Yes
Correct Answer: all of these
Correct Answer: velocity decreases
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.