logo

CuriousTab

CuriousTab

Discussion


Home Digital Electronics Integrated-Circuit Logic Families See What Others Are Saying!
  • Question
  • A "floating" TTL input may be defined as:


  • Options
  • A. unused input that is tied to Vcc through a 1 k Ω resistor.
  • B. unused input that is tied to used inputs.
  • C. unused input that is tied to the ground.
  • D. unused input that is not connected.

  • Correct Answer
  • unused input that is not connected. 


  • More questions

    • 1. The major advantage of dynamic RAM over static RAM is ________.

    • Options
    • A. cost
    • B. speed
    • C. storage density
    • D. cost and storage density
    • Discuss
    • 2. A device used to display one or more digital signals so that they can be compared to expected timing diagrams for the signals is a:

    • Options
    • A. DMM
    • B. spectrum analyzer
    • C. logic analyzer
    • D. frequency counter
    • Discuss
    • 3. What is the most important operation in binary-coded decimal (BCD) arithmetic?

    • Options
    • A. addition
    • B. subtraction
    • C. multiplication
    • D. division
    • Discuss
    • 4. Determine if diodes D1 and D2 in the given figure are forward or reverse biased.


    • Options
    • A. D1 forward and D2 reverse
    • B. D2 forward and D1 reverse
    • C. D1 and D2 reverse
    • D. D1 and D2 forward
    • Discuss
    • 5. An OR array is programmed by blowing fuses to eliminate selected variables from the output functions.

    • Options
    • A. True
    • B. False
    • Discuss
    • 6. Inputs that cause the output of a flip-flop to change instantaneously are asynchronous.

    • Options
    • A. True
    • B. False
    • Discuss
    • 7. Convert each of the following signed binary numbers (two's-complement) to a signed decimal number.
      00000101        11111100        11111000

    • Options
    • A. ?5    +4    +8
    • B. +5    ?4    ?8
    • C. ?5    +252    +248
    • D. +5    ?252    ?248
    • Discuss
    • 8. Which of the following is one of the basic characteristics of DRAMs?

    • Options
    • A. DRAMs must have a constantly changing input.
    • B. DRAMs must be periodically refreshed in order to be able to retain data.
    • C. DRAMs have a broader "dynamic" storage range than other types of memories.
    • D. DRAMs are simpler devices than other types of memories.
    • Discuss
    • 9. What is the main disadvantage of the counter-ramp A/D converter?

    • Options
    • A. It requires a counter.
    • B. The counter must count up from zero at the beginning of each conversion sequence, and the conversion time will vary depending on the input voltage.
    • C. It requires a precision clock in order for the conversion to be reliable.
    • D. The counter must count up from zero at the beginning of each conversion sequence, and the conversion time will vary depending on the input voltage. It requires a precision clock in order for the conversion to be reliable.
    • Discuss
    • 10. Most complex digital designs include a mix of different hardware categories.

    • Options
    • A. True
    • B. False
    • Discuss


    Comments

    There are no comments.

Enter a new Comment