Discussion
Home ‣ Digital Electronics ‣ Code Converters and Multiplexers Comments
- Question
Why is a demultiplexer called a data distributor?
Options- A. The input will be distributed to one of the outputs.
- B. One of the inputs will be selected for the output.
- C. The output will be distributed to one of the inputs.
- Correct Answer
- The input will be distributed to one of the outputs.
- 1. What is the function of an enable input on a multiplexer chip?
Options- A. to apply Vcc
- B. to connect ground
- C. to active the entire chip
- D. to active one half of the chip Discuss
- 2. How many inputs are required for a 1-of-10 BCD decoder?
Options- A. 4
- B. 8
- C. 10
- D. 1 Discuss
- 3. The primary use for Gray code is:
Options- A. coded representation of a shaft's mechanical position
- B. turning on/off software switches
- C. to represent the correct ASCII code to indicate the angular position of a shaft on rotating machinery
- D. to convert the angular position of a shaft on rotating machinery into hexadecimal code Discuss
- 4. A microcontroller differs from a microprocessor in that it has several ________ ports and ________ built into its architecture, making it better suited for ________ applications.
Options- A. communication, PROMs, control
- B. parallel, logic gates, processing
- C. input/output, memory, control
- D. data, memory, decoding Discuss
- 5. When two or more inputs are active simultaneously, the process is called:
Options- A. first-in, first-out processing
- B. priority encoding
- C. ripple blanking
- D. first-in, first-out processing or priority encoding Discuss
- 6. A binary code that progresses such that only one bit changes between two successive codes is:
Options- A. nine's-complement code
- B. 8421 code
- C. excess-3 code
- D. Gray code Discuss
- 7. A truth table with output columns numbered 0?15 may be for which type of decoder IC?
Options- A. hexadecimal 1-of-16
- B. dual octal outputs
- C. binary-to-hexadecimal
- D. hexadecimal-to-binary Discuss
- 8. In a Gray code, each number is 3 greater than the binary representation of that number.
Options- A. True
- B. False Discuss
- 9. How many inputs will a decimal-to-BCD encoder have?
Options- A. 4
- B. 8
- C. 10
- D. 16 Discuss
- 10. How many inputs are required for a 1-of-16 decoder?
Options- A. 2
- B. 4
- C. 8
- D. 16 Discuss
Code Converters and Multiplexers problems
Search Results
Correct Answer: to active the entire chip
Correct Answer: 4
Correct Answer: coded representation of a shaft's mechanical position
Correct Answer: input/output, memory, control
Correct Answer: priority encoding
Correct Answer: Gray code
Correct Answer: hexadecimal 1-of-16
Correct Answer: False
Correct Answer: 10
Correct Answer: 4
Comments
There are no comments.More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.