logo

CuriousTab

CuriousTab

Discussion


Home Digital Electronics Logic Gates Comments

  • Question
  • The logic expression for a NOR gate is ________.


  • Options
  • A. The logic expression for a NOR gate is ________.
  • B. The logic expression for a NOR gate is ________.
  • C. The logic expression for a NOR gate is ________.
  • D. The logic expression for a NOR gate is ________.

  • Correct Answer
  •  


  • Logic Gates problems


    Search Results


    • 1. A clock signal with a period of 1 µs is applied to the input of an enable gate. The output must contain six pulses. How long must the enable pulse be active?

    • Options
    • A. Enable must be active for 0 µs.
    • B. Enable must be active for 3 µs.
    • C. Enable must be active for 6 µs.
    • D. Enable must be active for 12 µs.
    • Discuss
    • 2. How many pins does the 4049 IC have?

    • Options
    • A. 14
    • B. 16
    • C. 18
    • D. 20
    • Discuss
    • 3. How many AND gates are found in a 7411 IC?

    • Options
    • A. 1
    • B. 2
    • C. 3
    • D. 4
    • Discuss
    • 4. What are the pin numbers of the outputs of the gates in a 7432 IC?

    • Options
    • A. 3, 6, 10, and 13
    • B. 1, 4, 10, and 13
    • C. 3, 6, 8, and 11
    • D. 1, 4, 8, and 11
    • Discuss
    • 5. A 2-input NOR gate is equivalent to a ________.

    • Options
    • A. negative-OR gate
    • B. negative-AND gate
    • C. negative-NAND gate
    • D. none of the above
    • Discuss
    • 6. What is the difference between a 7400 and a 7411 IC?

    • Options
    • A. 7400 has two four-input NAND gates; 7411 has three three-input AND gates
    • B. 7400 has four two-input NAND gates; 7411 has three three-input AND gates
    • C. 7400 has two four-input AND gates; 7411 has three three-input NAND gates
    • D. 7400 has four two-input AND gates; 7411 has three three-input NAND gates
    • Discuss
    • 7. How many input combinations would a truth table have for a six-input AND gate?

    • Options
    • A. 32
    • B. 48
    • C. 64
    • D. 128
    • Discuss
    • 8. The output of a NOT gate is HIGH when ________.

    • Options
    • A. the input is LOW
    • B. the input is HIGH
    • C. power is applied to the gate's IC
    • D. power is removed from the gate's IC
    • Discuss
    • 9. TTL operates from a ________.

    • Options
    • A. 9-volt supply
    • B. 3-volt supply
    • C. 12-volt supply
    • D. 5-volt supply
    • Discuss
    • 10. Fan-out is specified in terms of ________.

    • Options
    • A. voltage
    • B. current
    • C. wattage
    • D. unit loads
    • Discuss


    Comments

    There are no comments.

Enter a new Comment