Discussion
Home ‣ Digital Electronics ‣ Digital Concepts Comments
- Question
Convert the fractional binary number 0001.0010 to decimal.
Options- A. 1.40
- B. 1.125
- C. 1.20
- D. 1.80
- Correct Answer
- 1.125
- 1. A periodic digital waveform has a pulse width (tw) of 6 ms and a period (T) of 18 ms. The duty cycle is ________.
Options- A. 3.3%
- B. 33.3%
- C. 6%
- D. 18% Discuss
- 2. Which of the following is a semiconductor memory?
Options- A. RAM
- B. MAR
- C. CD-ROM
- D. CD Discuss
- 3. The output of an AND gate is LOW ________.
Options- A. all the time
- B. when any input is LOW
- C. when any input is HIGH
- D. when all inputs are HIGH Discuss
- 4. In the decimal numbering system, what is the MSD?
Options- A. The middle digit of a stream of numbers
- B. The digit to the right of the decimal point
- C. The last digit on the right
- D. The digit with the most weight Discuss
- 5. What is an analog-to-digital converter?
Options- A. It makes digital signals.
- B. It takes analog signals and puts them in digital format.
- C. It allows the use of digital signals in everyday life.
- D. It stores information on a CD. Discuss
- 6. PLCC packages have leads on ________.
Options- A. one side
- B. two sides
- C. three sides
- D. four sides Discuss
- 7. Digital signals transmitted on a single conductor (and a ground) must be transmitted in:
Options- A. slow speed.
- B. parallel.
- C. analog.
- D. serial. Discuss
- 8. A flip-flop has ________.
Options- A. one stable state
- B. no stable states
- C. two stable states
- D. none of the above Discuss
- 9. Give the decimal value of binary 10000110.
Options- A. 13410
- B. 14410
- C. 11010
- D. 12610 Discuss
- 10. The parallel transmission of digital data:
Options- A. is much slower than the serial transmission of data.
- B. requires only one signal line between sender and receiver.
- C. requires as many signal lines between sender and receiver as there are data bits.
- D. is less expensive than the serial method of data transmission. Discuss
Digital Concepts problems
Search Results
Correct Answer: 33.3%
Correct Answer: RAM
Correct Answer: when any input is LOW
Correct Answer: The digit with the most weight
Correct Answer: It takes analog signals and puts them in digital format.
Correct Answer: four sides
Correct Answer: serial.
Correct Answer: two stable states
Correct Answer: 13410
Correct Answer: requires as many signal lines between sender and receiver as there are data bits.
Comments
There are no comments.More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.