Discussion
Home ‣ Digital Electronics ‣ Digital Concepts Comments
- Question
The output of an AND gate is LOW ________.
Options- A. all the time
- B. when any input is LOW
- C. when any input is HIGH
- D. when all inputs are HIGH
- Correct Answer
- when any input is LOW
- 1. In the decimal numbering system, what is the MSD?
Options- A. The middle digit of a stream of numbers
- B. The digit to the right of the decimal point
- C. The last digit on the right
- D. The digit with the most weight Discuss
- 2. What is an analog-to-digital converter?
Options- A. It makes digital signals.
- B. It takes analog signals and puts them in digital format.
- C. It allows the use of digital signals in everyday life.
- D. It stores information on a CD. Discuss
- 3. In positive logic, ________.
Options- A. a HIGH = 1, a LOW = 0
- B. a LOW = 1, a HIGH = 0
- C. only HIGHs are present
- D. only LOWs are present Discuss
- 4. Which format can send several bits of information faster?
Options- A. Parallel
- B. Serial
- C. Both are the same
- D. Cannot tell Discuss
- 5. Digital representations of numerical values of quantities may BEST be described as having characteristics:
Options- A. that are difficult to interpret because they are continuously changing.
- B. that vary constantly over a continuous range of values.
- C. that vary in constant and direct proportion to the values they represent.
- D. that vary in discrete steps in proportion to the values they represent. Discuss
- 6. Which of the following is a semiconductor memory?
Options- A. RAM
- B. MAR
- C. CD-ROM
- D. CD Discuss
- 7. A periodic digital waveform has a pulse width (tw) of 6 ms and a period (T) of 18 ms. The duty cycle is ________.
Options- A. 3.3%
- B. 33.3%
- C. 6%
- D. 18% Discuss
- 8. Convert the fractional binary number 0001.0010 to decimal.
Options- A. 1.40
- B. 1.125
- C. 1.20
- D. 1.80 Discuss
- 9. PLCC packages have leads on ________.
Options- A. one side
- B. two sides
- C. three sides
- D. four sides Discuss
- 10. Digital signals transmitted on a single conductor (and a ground) must be transmitted in:
Options- A. slow speed.
- B. parallel.
- C. analog.
- D. serial. Discuss
Digital Concepts problems
Search Results
Correct Answer: The digit with the most weight
Correct Answer: It takes analog signals and puts them in digital format.
Correct Answer: a HIGH = 1, a LOW = 0
Correct Answer: Parallel
Correct Answer: that vary in discrete steps in proportion to the values they represent.
Correct Answer: RAM
Correct Answer: 33.3%
Correct Answer: 1.125
Correct Answer: four sides
Correct Answer: serial.
Comments
There are no comments.More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.