Discussion
Home ‣ Biochemical Engineering ‣ Fluid Flow Comments
- Question
Newtonian fluid is one in which the viscosity
Options- A. remains constant with time and power input
- B. increases with the level of power input
- C. decreases with the level of power input
- D. drastically increases with the level of power input
- Correct Answer
- remains constant with time and power input
- 1. Reynolds number for laminar flow over a plate should be less than
Options- A. 500 mm
- B. 5 x 10-5
- C. 5 x 105
- D. 5 m Discuss
- 2. The viscous nature of a non-Newtonian fluid
Options- A. remains constant with time and power input
- B. changes with the level of power input and/or the length of time during which the fluid is mixed
- C. is similar to that of a perfect gas
- D. is similar to that of water Discuss
- 3. A rheopectic fluid is one in which the viscosity
Options- A. is constant regardless of the stirrer speed or mixing time
- B. changes during mixing but returns to its original state after mixing
- C. increases with mixing time
- D. decreases with mixing time Discuss
- 4. A fluid in which the viscosity increases with increasing stirrer speed and mixing time can be called as
Options- A. newtonian fluid
- B. pseudoplastic, thixotropic fluid
- C. dilatant, rheopectic fluid
- D. dilatant pseudoplastic fluid Discuss
- 5. The best described action of Pluronic F68 (non-ionic detergent) in a cell culture medium is that, it
Options- A. acts on the surface properties of the cells and the culture medium
- B. provides nutrients for the cells
- C. acts as a flocculant
- D. acts as a coagulant Discuss
- 6. A Brookfield viscometer cannot determine the shear stress because
Options- A. the shear stress is not defined
- B. a computer is required
- C. the impeller type is given only by numbers
- D. all of the above Discuss
- 7. The viscosity of liquid was classified as both dilatant and rheopectic, which means that the viscosity
Options- A. increased with stirring speed but decreased with mixing time
- B. increased with stirring speed and increased with mixing time
- C. decreased with stirring speed but increased with mixing time
- D. decreased with stirring speed and decreased with mixing time Discuss
- 8. Non-linear relationship between shear stress and shear rate exists in
Options- A. newtonian fluids
- B. non-newtonian fluids
- C. both (a) and (b)
- D. none of these Discuss
- 9. Which pattern of mixing is preferred in stirred tank reactors during the culture of aerobic microorganisms?
Options- A. Laminar flow
- B. Transient flow
- C. turbulent flow
- D. all of these Discuss
- 10. The Komologorov eddy size
Options- A. is constant at all stirrer speeds
- B. increases with stirrer speed
- C. decreases with stirrer speed
- D. becomes zero when the stirrer speed is very low Discuss
Fluid Flow problems
Search Results
Correct Answer: 5 x 105
Correct Answer: changes with the level of power input and/or the length of time during which the fluid is mixed
Correct Answer: increases with mixing time
Correct Answer: dilatant, rheopectic fluid
Correct Answer: acts on the surface properties of the cells and the culture medium
Correct Answer: the shear stress is not defined
Correct Answer: increased with stirring speed and increased with mixing time
Correct Answer: non-newtonian fluids
Correct Answer: turbulent flow
Correct Answer: decreases with stirrer speed
Comments
There are no comments.Programming
Copyright ©CuriousTab. All rights reserved.