Discussion
Home ‣ Biochemical Engineering ‣ Fluid Flow Comments
- Question
Pluronic F68 protects mammalian cells from damage stems as it is a/an
Options- A. surface active agent which stabilizes foams
- B. surface active agent which destabilizes foams
- C. excellent source of vitamins
- D. coagulant
- Correct Answer
- surface active agent which stabilizes foams
- 1. Which of the following is correct?
Options- A. The viscosity of liquids and gases decrease with increasing temperature
- B. The viscosity of liquids and gases increase with increasing temperature
- C. the viscosity of gases increases with increasing temperature, but decreases in liquids
- D. the viscosity of gases decreases with increasing temperature, but decreases in liquids. Discuss
- 2. A viscoelastic fluid is one in which the viscosity
Options- A. is constant regardless of the stirrer speed or mixing time
- B. changes during mixing but returns to its original state after mixing
- C. increases with increasing stirrer speed
- D. decreases with increasing stirrer speed Discuss
- 3. If the viscosity of a fluid decreases with the length of time that it is being mixed, then this fluid is
Options- A. newtonian
- B. rheopectic
- C. viscoelastic
- D. thixotropic Discuss
- 4. Bubble free aeration systems requires
Options- A. silicone tubing or gas permeable membranes to facilitate gas transfer
- B. carbon dioxide instead of air to supply oxygen
- C. silicone tubing or gas permeable membranes to remove carbon dioxide by oxygen in the form of hydrogen peroxide
- D. filled headspace of the reactor with carbon dioxide Discuss
- 5. A liquid is flowing at 11,400 l.h-1 along a pipeline having a diameter of 4 cm. If the liquid has a density of 1 g.ml-1 and viscosity of 0.001kg.m-1.s-1, then the liquid would be in the
Options- A. laminar phase
- B. transient phase
- C. turbulent phase
- D. any of the phase Discuss
- 6. Mixing in stirred tank reactors can
Options- A. be described as either laminar, transient or turbulent
- B. achieve turbulent conditions by increasing the stirrer speed
- C. induce laminar flow conditions by the addition of baffles
- D. all of the above Discuss
- 7. If the viscosity of a fluid decreases with increasing stirrer speed, then the nature of the fluid is
Options- A. newtonian
- B. pseudoplastic
- C. dilatant
- D. thixotropic Discuss
- 8. Pluronic F68 is added to cell culture media as
Options- A. a nutrient
- B. a shear protectorant
- C. to increase oxygen transfer rates
- D. all of these Discuss
- 9. Which of the following affect the Kolmogorov eddy size?
Options- A. Stirrer speed
- B. Physical properties of the liquid
- C. Size and type of impeller
- D. All of these Discuss
- 10. The best described action of Pluronic F68 (non-ionic detergent) in a cell culture medium is that, it
Options- A. acts on the surface properties of the cells and the culture medium
- B. provides nutrients for the cells
- C. acts as a flocculant
- D. acts as a coagulant Discuss
Fluid Flow problems
Search Results
Correct Answer: the viscosity of gases increases with increasing temperature, but decreases in liquids
Correct Answer: changes during mixing but returns to its original state after mixing
Correct Answer: thixotropic
Correct Answer: silicone tubing or gas permeable membranes to facilitate gas transfer
Correct Answer: turbulent phase
Correct Answer: be described as either laminar, transient or turbulent
Correct Answer: pseudoplastic
Correct Answer: a shear protectorant
Correct Answer: All of these
Correct Answer: acts on the surface properties of the cells and the culture medium
Comments
There are no comments.Programming
Copyright ©CuriousTab. All rights reserved.