In a thyristor the gate current is increased, then anode current will increase a

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Power Electronics Comments

Question
In a thyristor the gate current is increased, then
Options
A. anode current will increase
B. anode current will decrease
C. anode current will remain constant
D. anode current may increase or decrease

Correct Answer

anode current will remain constant

Explanation

Gate current does not affect the magnitude of anode current.

Power Electronics problems

Search Results

1. Assertion (A): If the duty cycle of chopper is low the current would not become discontinuous
Reason (R): If the time constant L/R of the load in chopper is low the current may become discontinuous.
Options
A. Both A and R are correct and R is correct explanation of A
B. Both A and R correct but R is not correct explanation of A
C. A is correct but R is wrong
D. A is wrong but R is correct

2. A chopper
Options
A. converts constant voltage dc into ac and then into variable voltage dc
B. converts constant voltage dc into variable voltage dc directly
C. converts ac of one frequency into ac of another frequency
D. converts ac to dc

3. Figure shows a chopper feeding RLE load, The free wheeling diode conducts when
Options
A. thyristor is on
B. thyristor is off
C. both when thyristor is on and thyristor is off
D. partly when thyristor is off and partly when thyristor is on

5. In a single phase full wave converter (M - 2 connection) feeding a highly inductive load, the firing angle for each thyristor is a in the respective half cycle. The period of conduction of each thyristor is
Options
A. p - a
B. p
C. p + a
D. p - 2a

6. Assertion (A): An ideal rectifier should have unity harmonic factor
Reason (R): An ideal rectifier should have unity displacement factor.
Options
A. Both A and R are correct and R is correct explanation of A
B. Both A and R correct but R is not correct explanation of A
C. A is correct but R is wrong
D. A is wrong but R is correct

7. A thyristor has a maximum allowable junction temperature of 120�C and the ambient temperature is 40�C. If thermal resistance is 1.6� C/W, the maximum allowable internal power dissipation is
Options
A. 20 W
B. 50 W
C. 92 W
D. 128 W

8. The characteristics of a non-linear resistance is i = kv⁴. If i becomes 100 times, v becomes
Options
A. about 100 times
B. about 10 times
C. about 3 times
D. about twice

Comments

zainalabdean jasem
-What is the relation between gate current and anode current of thyristor in conduction period?

More in Electronics and Communication Engineering: