A rectangular metal waveguide filled with a dielectric of relative permittivity

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Electromagnetic Field Theory Comments

Question
A rectangular metal waveguide filled with a dielectric of relative permittivity ?_r = 4, has the inside dimensions 3 x 1.2 cm, the cut off frequency for the dominant mode is
Options
A. 2.5 GHz
B. 5 GHz
C. 10 GHz
D. 12.5 GHz

Correct Answer

5 GHz

Explanation

A rectangular metal waveguide filled with a dielectric of relative permittivity ?r = 4, has the insi

for dominant mode.

Electromagnetic Field Theory problems

Search Results

1. A broadside array operating at 100 cm wavelength consist of 4 half-wave dipoles spaced 50 cm apart. Each element carries radio frequency current in the same phase and of magnitude 0.5 A. The radiated power will be
Options
A. 196 W
B. 73 W
C. 36.5 W
D. 18.25 W

2. The divergence of the electric field intensity at any point equals
Options
A. 1/4 p?₀ times the volume charge density
B. l/?₀ times the volume charge density at that point
C. ?₀ times the volume charge density at that point
D. the volume charge density at that point

3. Radiation intensity of a dipole depends strongly on frequency. If at a frequency f, the intensity of radiation is 'I'. Then at a frequency of f/2, the intensity will be
Options
A.
B.
C.
D.

4. The Depth of penetration of EM wave in medium having conductivity ? at a frequency of 1 MHz is 25 cm. The depth of penetration at a frequency of 4 MHz will be
Options
A. 6.25 cm
B. 12.50 cm
C. 50 cm
D. 100 cm

5. For a 400 kHz transmission line having L = 0.5 mH/km, C = 0.08 mF and negligible R and G, the value of propagation constant P will be
Options
A. 15.9 radians/km
B. 31.8 radians/km
C. 63.6 radians/km
D. 105.4 radians/km

6. Two identical antennas are placed in the ? = p/2 plane as shown in the figure. The elements have equal amplitude excitation with 180� polarity difference, operating of the far-zone resultant electric field strength normalized with that of a single element, both computed for ? = 0, is
Options
A.
B.
C.
D.

8. A broadside array consisting of 200 cm wavelength with 10 half-wave dipole spacing 10 cm. And if each array element feeding with 1 amp. current and operating at same frequency then find the half power beamwidth
Options
A. 4�
B. 2�
C. 10�
D. 15�

9. A wave is propagated in a waveguide at frequency of 9 GHz and separation is 2 cm between walls find cut off wavelength for dominant mode.
Options
A. 4 cm
B. 1 cm
C. 2 cm
D. 8 cm

10. A (75 - j 40) W load is connected to a co-axial line of z₀ = 75? at 6 MHz. The load matching on the line can be accomplished by connecting
Options
A. a short circuit stub at the load
B. an inductance at the load
C. a short circuit stub at a specific distance from the load
D. a capacitance at a specific distance from the load

Comments

There are no comments.

More in Electronics and Communication Engineering: