logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Airport Engineering Comments

  • Question
  • The strength of winds is measured with the help of


  • Options
  • A. Benfort scale
  • B. Wind indicator
  • C. Barometres
  • D. None of these.

  • Correct Answer
  • Benfort scale 


  • Airport Engineering problems


    Search Results


    • 1. An aircraft is flying in an atmosphere of 30°C with a speed of 1260 km ph. Its speed is known as

    • Options
    • A. subsonic
    • B. sonic
    • C. super-sonic
    • D. Mach.
    • Discuss
    • 2. If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be

    • Options
    • A. 1500 m
    • B. 1200 m
    • C. 1000 m
    • D. 800 m
    • Discuss
    • 3. Pick up the incorrect statement from the following:

    • Options
    • A. L.O.M. is installed at 7.2 km from the threshold
    • B. L.M.M. is installed at 1.0 km from the threshold
    • C. Localizer antenna is installed at 300 m from the other end of the runway
    • D. Glide slope antenna is installed at the centre of the runway about 150 m on one side
    • E. None of these.
    • Discuss
    • 4. For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is

    • Options
    • A. 25 m
    • B. 50 m
    • C. 75 m
    • D. 100 m
    • Discuss
    • 5. Wing loading of an aircraft is

    • Options
    • A. load of the wings
    • B.
    • C.
    • D.
    • E. None of these.
    • Discuss
    • 6. The threshold markings are

    • Options
    • A. 4 m wide
    • B. 1 m clear space between adjacents
    • C. 45 m in length
    • D. placed symmetrically on either side of the runway centre line
    • E. all the above.
    • Discuss
    • 7. According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by

    • Options
    • A. Seven English alphabets
    • B. Last Seven English alphabets
    • C. First Seven English alphabets
    • D. First seven natural numbers.
    • Discuss
    • 8. For the taxiways, the following statement is true

    • Options
    • A. The maximum longitudinal grade is 3%
    • B. The permissible rate of change of grade is 1%
    • C. The permissible transverse grade is 1.5%
    • D. All the above.
    • Discuss
    • 9. A gradient of + 0.08% is followed by a gradient of - 0.07%. If the permissible rate of change of grade is 0.003 per 30 metres, the length of the transition curve, is

    • Options
    • A. 150 m
    • B. 140 m
    • C. 160 m
    • D. 175 m
    • Discuss
    • 10. According to I.C.A.O. the recommended length of air ports is decided on

    • Options
    • A. sea level elevation
    • B. standard sea level temperature (15°C)
    • C. effective gradient percentage
    • D. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment