Address multiplexing is used to reduce the number of address lines.

More Questions from Memory and Storage

• ROMs are used to store data that generally cannot be easily changed.
• A write operation may also be referred to as a "fetch" operation.
• ROMs are used to store data on a permanent basis.
• The most widespread application of ROMs is in the storage of data and program codes that must be available on power-down in the microprocessor-based systems. These data and program codes are called firmware because they are firmly stored in hardware.
• The TMS44100 4M × 1 DRAM does not have a chip select (SC) input.
• A CD player is an example of a device that has random access capability.
• A term often used commercially to refer to read/write memory is sequential-access memory.
• If a memory design allows a storage location to be accessed without first sequencing through other locations, it is called Random Access Memory.
• Flash memories are frequently used in place of floppy or small-capacity hard disk drives in portable computers.
• EEPROM and Flash memory are electrically erasable.

Discussion & Comments