Curioustab

Home » Digital Electronics » Interfacing to the Analog World

For each bit that is added to a digital ramp ADC, the conversion time ________.

doubles
triples
decreases by one-third
decreases by one-half

Correct Answer: doubles

← Previous Question Next Question→

More Questions from Interfacing to the Analog World

A 4-bit stairstep-ramp A/D converter has a clock frequency of 100 kHz and a maximum input of 10 V, and has 6 V applied to the input. The conversion time will be ________.
The stability of the ADC process can be improved by using a(n) ________ to hold the analog voltage constant while the A/D conversion is taking place.
There are many applications in which analog data must be digitized and transferred into a computer's memory. The process by which the computer acquires these digitized analog data is referred to as ________.
A simultaneous A/D converter is also known as a(n) ________ A/D converter.
A major application for DSP is in ________ and ________ of analog signals.
The input of an analog-to-digital converter is ________.
The characteristic that a change of one binary step on the input of a DAC should cause exactly one step change on the output is called ________.
On a binary-weighted D/A converter the least significant binary input ________.
________ ADCs use no clock signal, because there is no timing or sequencing required.
The circuit shown below is a(n) ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion