Curioustab

Home » Digital Electronics » Interfacing to the Analog World

The circuit shown below is a(n) ________.

R/2R ladder D/A converter
four-bit decoder
binary-weighted-input DAC
four-bit A/D converter

Correct Answer: R/2R ladder D/A converter

← Previous Question Next Question→

More Questions from Interfacing to the Analog World

The number of binary bits at the input of a DAC or the output of an ADC is known as ________.
The output of the circuit in the given figure (a) at point X on figure (b) will be ________.
________ ADCs have a fixed value of conversion time that is not dependent on the value of the analog input.
A signal ________ is produced by sampling the signal at a rate less than the minimum rate identified by Nyquist.
The fastest analog-to-digital converter is the ________.
A binary-weighter resistor DAC is practical only up to a resolution of ________.
The primary disadvantage of the simultaneous A/D converter is ________.
When analog inputs from several sources are to be converted, a(n) ________ technique can be used.
A DAC is ________ if its output increases as the binary input increments from one value to the next.
________ DACs produce both positive and negative output values.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion