Curioustab

Home » Digital Electronics » Digital System Projects Using HDL

In the digital clock project HDL, the 1 pps signal is used as a synchronous clock for all of the counters' stages, which are synchronously cascaded.

True

Correct Answer: True

← Previous Question Next Question→

More Questions from Digital System Projects Using HDL

In the digital clock project, the 60 Hz signal is sent through a Schmitt-trigger circuit to produce sine wave pulses at the rate of 60 pps.
One CASE construct inside another CASE construct is called a do-loop.
In HDL when a circuit is simulated on a computer, the designer must create all the different scenarios that will be experienced by the actual circuit and must also know the proper response to those inputs.
The wave-drive sequence of a stepper motor has more torque and operates more smoothly than the full-step sequence at moderate speeds.
One of the first steps in any HDL project is to define its scope by naming each input and output.
In HDL, one of the strategies used in strategic planning is to find a way to test each piece of the project.
Top-down design means that we start at the highest level of the hierarchy, or that the entire project is considered to exist in a closed dark box with inputs and outputs.
A very critical dimension in project management is the time your boss will give you to complete the HDL project.
In the keypad HDL encoder, NANDing of the columns is used to activate the freeze bit.
In the keypad HDL encoder, the ts bit array represents a tristate buffer.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion